Jjc RM-E1 Manuel d'utilisateur télécharger pdf

JJC RM-E1

Infrared Remote Control Instruction

Thank you for purchasing JJC RM-E1 Infrared Remote Control. For the best performance, please

read this instruction carefully before use.

z To use RM-E1 Remote Control

1. For the first time use, please pull out the plastic separator (if your remote control has it) at the

battery holder.

2. Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.

3. Press the button and rotate main command dial until (delayed remote) or (quick

response remote) is displayed in the control panel.

4. Aim the transmitter on the remote control at the infrared receiver on the camera (usually within

+/- 20 degree of the lens axis, from the left to the right and from the top to the bottom) and

press the shutter-release button on the remote control (when using the remote outdoors, make

sure that the subject is not backlit and that the line of site between the transmitter and the

infrared receiver is not blocked by the lens or other obstacles).

5. How the camera focuses and shoots depends on the option selected for your camera's custom

setting. For further information, check your camera's manual.

6. Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the

front end of the remote control when operating.

For further information, check your camera's manual.

1 2 3

1JJC RM-E1 Infrared Remote Control Instruction Thank you for purchasing JJC RM-E1 Infrared Remote Control. For the best performance, please read th

2z Identifying the buttons S Button for camera shutter. T Side for telephoto W Side for wide-angel + Move forward (replay mode) - Move Backward (re

Page 3

3RM-E1 compatible with Olympus cameras E1 E3 E10 E20 E30 E100 RS E300 E330 E400 E410 E420 E450 E510 E520 E620 Digital SLR E600 E-P1 E-

Pas de commentaire

Jjc RM-E1 Manuel d'utilisateur